mangavalkandClaude Opus 5.5
5fbae6247c
- The bit-banged WS2812 update disables interrupts (about 30 us per pixel), which made the lit tube stay on longer and flash. neoShow() now only sends when the pixels changed (fixed colour was resent every second) and waits for the dark gap between tubes; the bit-bang strip has no headroom pixels. This also fixed digits that seemed to hang. - 4 WS2812 on this board, one per tube (not 8) - Saving the firmware URL in the web UI no longer starts an HTTP update; never update from an empty URL - Restart once after the first switch from AP mode to WiFi, so ArduinoOTA and MQTT start on the real network - Optional web UI password (WEB_USER/WEB_PASSWORD in secrets.h); /getConfiguration returns the stored WiFi and MQTT passwords - Cathode protect: random mode now starts at a random tube (the +-1 start digits were swapped and then overwritten) - Apply the unused gamma table to wheel colours - LOOP_DIAG (off by default): main-loop stalls in /getCurrentInfos, which now also reports uptime and free heap Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>