mangavalkandClaude Opus 5.5
0d3e878051
Adds CLOCK_90 and the nixie595.ino driver: two 74HC595s on hardware SPI (GPIO13/14, latch GPIO15), multiplexed from an IRAM-only timer1 ISR. Neon dots on P1; P2 is the decimal-point line on this board. Also: - NeoPixel on any ESP8266 pin via bit-bang (GPIO12), and take the pin back after SPI.begin() claimed it as MISO - ArduinoOTA (USE_ARDUINO_OTA), with an OTA upload env in platformio.ini - DST: EU end date (last Sunday of October) instead of the first Sunday of November, and recompute the time from the rules when DST is toggled instead of shifting it by 1 h - forward declarations so PlatformIO's .ino conversion compiles - FIRMWARE_SERVER can be overridden; empty for CLOCK_90 Verified on the clock: tubes, order, dots, LEDs, LDR, NTP time with DST. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
7 lines
357 B
Plaintext
7 lines
357 B
Plaintext
// Copy to secrets.h (gitignored) and fill in. All entries are optional.
|
|
// DEFAULT_SSID/DEFAULT_PSW are only applied on a factory reset (first boot with a new EEPROM layout);
|
|
// otherwise set the WiFi from the clock's web page.
|
|
#define DEFAULT_SSID ""
|
|
#define DEFAULT_PSW ""
|
|
#define OTA_PASSWORD "" //ArduinoOTA password; remove the line for no password
|