5 Commits
Author SHA1 Message Date
patriandClaude Opus 5.5 c9fb70ad10 12-OBD-Speed: choose the background GIF from the SD card
- background page (4th tile): built-in or any GIF in /gifs on the SD card
- chosen GIF is copied into a raw 11.9 MB 'bggif' flash partition (header
  written last) and played memory-mapped from flash; SD only needed when
  choosing or when the file changed (checked at boot in the background)
- own partitions.csv: 4 MB app + bggif + NVS
- tools/gif_to_360.py: convert GIFs to 360x360 keeping frame timing;
  converted output (12-OBD-Speed/sd/) is git-ignored

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 18:58:44 +02:00
patriandClaude Opus 5.5 be69bda4f1 12-OBD-Speed: battery voltage arc and idle/screen-off mode
- ATRV every 2 s; voltage arc in the bottom gap (11-15 V) + number,
  colored by state (low / weak / resting / charging / overcharge)
- idle after Off/2/5/10 min without speed data (settings page, NVS):
  screen off, GIF paused, OBD polling stopped, ATRV every 30 s;
  wakes on touch (swallowed by a top-layer overlay) or > 13.2 V
- status pill moved up to make room for the voltage

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 18:32:56 +02:00
patriandClaude Opus 5.5 4fc70f13d0 12-OBD-Speed: settings page with screen rotation (0/90/180/270)
- third tile (swipe left from the menu): rotation buttons, saved in NVS,
  applied at boot
- shared lib: setRotation() rotates only the panel and redraws; touch
  points are converted in touchpad_read() for the current rotation;
  getRotation() added

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 18:20:35 +02:00
patriandClaude Opus 5.5 733306a9c0 Cleanup: remove BLE scanner, rename 10-OBD-Display-2024 to 10-GIF-Tests
- 11-BLE-Scanner removed; its car-test log moved to 12-OBD-Speed/docs
- 10-OBD-Display-2024 -> 10-GIF-Tests (GIF playback experiments)
- the broken LVGL 9 archive was already deleted (unintentionally) in d6982ab
- READMEs and CLAUDE.md references updated; visual check of 80 MHz QSPI /
  RGB565_SWAPPED marked as confirmed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 18:14:23 +02:00
patriandClaude Opus 5.5 66f70c0cc1 Add 12-OBD-Speed: ELM327 speed over BLE on a GIF background
- speed page: 120 px antialiased number (lv_font_conv) + 0-200 km/h arc
  gauge over ezgif-5-cb56986bc7.gif (embedded via board_build.embed_files)
- swipe-left menu: scan, OBD-like adapters first, tap to select; adapter
  remembered in NVS, auto-connect at boot and reconnect every 3 s
- ELM327 init ATZ/ATE0/ATL0/ATS0/ATH0/ATSP0/0100, then 010D polling
- shared ini: -DLV_LVGL_H_INCLUDE_SIMPLE for generated fonts

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 16:49:37 +02:00