mangavalkandClaude Opus 5.5
cb1e9234c6
Fusion 360 STL exports of the body, legs, hinges, foot, servo horn and test legs into robot-parts/, and an early remote part into remote-case/. Found in an old Hexapod folder; the remote files that came with them were already in the repo. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
18 lines
1.4 KiB
Markdown
18 lines
1.4 KiB
Markdown
# 2019–2022: Teensy robot and Teensy remote
|
||
|
||
The SSC-32 was replaced by a Teensy 3.6 on the robot that drives the 18 servos itself, and a second Teensy
|
||
became the handheld remote. They talk over nRF24L01 (RF24Network, channel 90). The robot has no IK of its own:
|
||
it plays the servo angles it receives, which come from the Unity simulation (`../2018-unity-sim/`) through the
|
||
remote's USB passthrough, or from the remote's sliders.
|
||
|
||
| Folder | What |
|
||
|---|---|
|
||
| `Hexapod_Teensy/` | robot: PWMServo on 18 pins, per-servo ranges and trims (`config.h`), MPU6050, nRF24 (CE 39, CSN 15, SCK 14) |
|
||
| `remote/` | remote: Nextion screen, 6 joystick axes with EEPROM calibration, MPU6050, nRF24 (CE 9, CSN 10), USB passthrough at 250000 |
|
||
| `remote-nextion/` | `remote.HMI`, the Nextion Editor design (6 pages: servo monitor, upload screen) |
|
||
| `remote-case/` | 3D-print files of the remote case and bezel, an Arduino Mega cover plate, a font |
|
||
| `robot-parts/` | May 2019 Fusion 360 STL exports of the robot's printed parts: body top and bottom, legs, hinges, foot (`sock.stl`), Hitec servo horn, test legs. Early versions of the designs in `../2026-current/hardware/fusion360/` |
|
||
| `tests/` | May 2019 bring-up sketches: SSC-32 command emulator (first step to replacing the SSC-32), nRF24 and MPU6050 tests with the robot's pins |
|
||
|
||
Its hardware facts (pins, ranges, trims) were carried over into `../2026-current/robot/Config.h`.
|