Draft: shared protocol, remote firmware, project docs

Not yet verified on hardware.

- shared/HexapodProtocol: CmdPacket (now 20 bytes, adds remote_roll /
  remote_pitch), FLAG_* bits and radio settings as the single protocol
  definition; static payload size = sizeof(CmdPacket) on both radios.
- robot: use the shared protocol; vx = forward (harness w/x <-> q/e);
  InputMapper adds remote tilt on top of the right stick when
  FLAG_REMOTE_GYRO is set, and robot.ino no longer zeroes stick
  roll/pitch when it's off.
- remote (Teensy 4.1): Sticks (calibration, EEPROM), RemoteIMU,
  RemoteState (interlocks, link-loss disarm, smoothing), PacketBuilder,
  RadioLink, NextionUI, SerialConsole.
- CLAUDE.md, README.md, remote/README.md, remote/NEXTION.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-current/shared/HexapodProtocol/library.json

@@ -0,0 +1,7 @@
+{
+  "name": "HexapodProtocol",
+  "version": "2.0.0",
+  "description": "Remote->robot CmdPacket wire format and nRF24 link settings shared by robot/ and remote/.",
+  "frameworks": "arduino",
+  "platforms": "teensy"
+}