mangavalkandClaude Opus 5.5
b347f1c63f
Vendored from https://github.com/gpeter62/ESP_UniClock: the sketch source, the web UI and the libraries the ESP8266 build needs, unpacked from the bundled zips. Adds a PlatformIO project for the ESP-12. The source is unchanged; local changes follow as separate commits. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
54 lines
1.2 KiB
Arduino
54 lines
1.2 KiB
Arduino
#include <Ethernet.h>
|
|
#include <ArduinoHA.h>
|
|
|
|
#define BROKER_ADDR IPAddress(192,168,0,17)
|
|
|
|
byte mac[] = {0x00, 0x10, 0xFA, 0x6E, 0x38, 0x4A};
|
|
|
|
EthernetClient client;
|
|
HADevice device(mac, sizeof(mac));
|
|
HAMqtt mqtt(client, device);
|
|
|
|
// HAFan::SpeedsFeature enables support for setting different speeds of fan.
|
|
// You can skip this argument if you don't need speed management.
|
|
// "ventilation" is unique ID of the fan. You should define your own ID.
|
|
HAFan fan("ventilation", HAFan::SpeedsFeature);
|
|
|
|
void onStateChanged(bool state) {
|
|
Serial.print("State: ");
|
|
Serial.println(state);
|
|
}
|
|
|
|
void onSpeedChanged(uint16_t speed) {
|
|
Serial.print("Speed: ");
|
|
Serial.println(speed);
|
|
}
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
|
|
// you don't need to verify return status
|
|
Ethernet.begin(mac);
|
|
|
|
// set device's details (optional)
|
|
device.setName("Arduino");
|
|
device.setSoftwareVersion("1.0.0");
|
|
|
|
// configure fan (optional)
|
|
fan.setName("Bathroom");
|
|
fan.setRetain(true);
|
|
fan.setSpeedRangeMin(1);
|
|
fan.setSpeedRangeMax(100);
|
|
|
|
// handle fan states
|
|
fan.onStateChanged(onStateChanged);
|
|
fan.onSpeedChanged(onSpeedChanged);
|
|
|
|
mqtt.begin(BROKER_ADDR);
|
|
}
|
|
|
|
void loop() {
|
|
Ethernet.maintain();
|
|
mqtt.loop();
|
|
}
|