mangavalkandClaude Opus 5.5
b347f1c63f
Vendored from https://github.com/gpeter62/ESP_UniClock: the sketch source, the web UI and the libraries the ESP8266 build needs, unpacked from the bundled zips. Adds a PlatformIO project for the ESP-12. The source is unchanged; local changes follow as separate commits. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
44 lines
1.0 KiB
Arduino
44 lines
1.0 KiB
Arduino
/*
|
|
Basic MQTT example with Authentication
|
|
|
|
- connects to an MQTT server, providing username
|
|
and password
|
|
- publishes "hello world" to the topic "outTopic"
|
|
- subscribes to the topic "inTopic"
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <Ethernet.h>
|
|
#include <PubSubClient.h>
|
|
|
|
// Update these with values suitable for your network.
|
|
byte mac[] = { 0xDE, 0xED, 0xBA, 0xFE, 0xFE, 0xED };
|
|
IPAddress ip(172, 16, 0, 100);
|
|
IPAddress server(172, 16, 0, 2);
|
|
|
|
void callback(char* topic, byte* payload, unsigned int length) {
|
|
// handle message arrived
|
|
}
|
|
|
|
EthernetClient ethClient;
|
|
PubSubClient client(server, 1883, callback, ethClient);
|
|
|
|
void setup()
|
|
{
|
|
Ethernet.begin(mac, ip);
|
|
// Note - the default maximum packet size is 128 bytes. If the
|
|
// combined length of clientId, username and password exceed this use the
|
|
// following to increase the buffer size:
|
|
// client.setBufferSize(255);
|
|
|
|
if (client.connect("arduinoClient", "testuser", "testpass")) {
|
|
client.publish("outTopic","hello world");
|
|
client.subscribe("inTopic");
|
|
}
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
client.loop();
|
|
}
|