mangavalkandClaude Opus 5.5
b347f1c63f
Vendored from https://github.com/gpeter62/ESP_UniClock: the sketch source, the web UI and the libraries the ESP8266 build needs, unpacked from the bundled zips. Adds a PlatformIO project for the ESP-12. The source is unchanged; local changes follow as separate commits. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
84 lines
2.1 KiB
Arduino
84 lines
2.1 KiB
Arduino
// NeoPixelBrightness
|
|
// This example will cycle brightness from high to low of
|
|
// three pixels colored Red, Green, Blue.
|
|
// This demonstrates the use of the NeoPixelBrightnessBus
|
|
// with integrated brightness support
|
|
//
|
|
// There is serial output of the current state so you can
|
|
// confirm and follow along
|
|
//
|
|
|
|
#include <NeoPixelBrightnessBus.h> // instead of NeoPixelBus.h
|
|
|
|
const uint16_t PixelCount = 3; // this example assumes 3 pixels, making it smaller will cause a failure
|
|
const uint8_t PixelPin = 14; // make sure to set this to the correct pin, ignored for Esp8266
|
|
|
|
#define colorSaturation 255 // saturation of color constants
|
|
RgbColor red(colorSaturation, 0, 0);
|
|
RgbColor green(0, colorSaturation, 0);
|
|
RgbColor blue(0, 0, colorSaturation);
|
|
|
|
// Make sure to provide the correct color order feature
|
|
// for your NeoPixels
|
|
NeoPixelBrightnessBus<NeoRgbFeature, Neo800KbpsMethod> strip(PixelCount, PixelPin);
|
|
|
|
// you loose the original color the lower the dim value used
|
|
// here due to quantization
|
|
const uint8_t c_MinBrightness = 8;
|
|
const uint8_t c_MaxBrightness = 255;
|
|
|
|
int8_t direction; // current direction of dimming
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
while (!Serial); // wait for serial attach
|
|
|
|
Serial.println();
|
|
Serial.println("Initializing...");
|
|
Serial.flush();
|
|
|
|
// this resets all the neopixels to an off state
|
|
strip.Begin();
|
|
strip.Show();
|
|
|
|
direction = -1; // default to dim first
|
|
|
|
Serial.println();
|
|
Serial.println("Running...");
|
|
|
|
// set our three original colors
|
|
strip.SetPixelColor(0, red);
|
|
strip.SetPixelColor(1, green);
|
|
strip.SetPixelColor(2, blue);
|
|
|
|
strip.Show();
|
|
}
|
|
|
|
|
|
void loop()
|
|
{
|
|
uint8_t brightness = strip.GetBrightness();
|
|
Serial.println(brightness);
|
|
|
|
delay(100);
|
|
|
|
// swap diection of dim when limits are reached
|
|
//
|
|
if (direction < 0 && brightness <= c_MinBrightness)
|
|
{
|
|
direction = 1;
|
|
}
|
|
else if (direction > 0 && brightness >= c_MaxBrightness)
|
|
{
|
|
direction = -1;
|
|
}
|
|
// apply dimming
|
|
brightness += direction;
|
|
strip.SetBrightness(brightness);
|
|
|
|
// show the results
|
|
strip.Show();
|
|
}
|
|
|