patriandClaude Opus 5.5
733306a9c0
- 11-BLE-Scanner removed; its car-test log moved to 12-OBD-Speed/docs
- 10-OBD-Display-2024 -> 10-GIF-Tests (GIF playback experiments)
- the broken LVGL 9 archive was already deleted (unintentionally) in d6982ab
- READMEs and CLAUDE.md references updated; visual check of 80 MHz QSPI /
RGB565_SWAPPED marked as confirmed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
1.9 KiB
1.9 KiB
OBD Speed (JC3636W518)
Vehicle speed from an ELM327 over BLE, shown as a big number + arc gauge on top of an animated GIF.
Uses the shared board library and LVGL 9.6 (../shared), NimBLE-Arduino 2.5.1.
Use
- Speed page — speed in km/h (
--= no data: not connected, or ignition off), arc gauge 0–200 km/h, status at the bottom (adapter name when running, otherwise what it is doing). - Swipe left → adapter menu — scans while open. OBD-like adapters (name OBD/ELM/…, or service FFF0/FFE0/18F0) are listed first in green. Tap one to select it: it is remembered (NVS) and connected immediately. Forget clears the remembered adapter, Done (or swipe right) returns to the speed page.
- On power-up the remembered adapter is connected automatically; if the link drops or the adapter is not there (car off), it retries every 3 s. With no adapter remembered, the device starts on the menu page.
How it talks to the ELM327
Service FFF0, notifications + commands on FFF1 (verified with the user's "OBDII" adapter, see
docs/2026-10-23_ble_scanner_car_test.txt, made with the BLE scanner tool that was removed afterwards — in git history); other adapters: first notify+write pair.
Init: ATZ, ATE0, ATL0, ATS0, ATH0, ATSP0, 0100; then 010D (speed) is polled continuously.
Serial (115200) prints status changes as [obd] ....
Files
| File | What |
|---|---|
src/main.cpp |
LVGL UI (tileview: speed page + menu page) |
src/obd_link.cpp/.h |
BLE scan, connect/reconnect, ELM327 init and speed polling (background task on core 0) |
src/font_speed_120.c |
Montserrat Medium 120 px, digits and -, 4 bpp (generated with lv_font_conv, see header) |
data/bg.gif |
Background (ezgif-5-cb56986bc7.gif, 360×360), linked into the firmware via board_build.embed_files |
Replace data/bg.gif with any 360×360 GIF to change the background (keep it under ~3 MB).