#include <Arduino.h>
#include "scr_st77916.h"
#include "SD_MMC.h"

void my_print(const char* buf) {
  Serial.println(buf);  // Print logs to the serial monitor
}

void display_animation() {
  lv_obj_t* img;

  img = lv_gif_create(lv_scr_act());

  Serial.print("Available Heap before: ");
  Serial.println(esp_get_free_heap_size());

  lv_mem_monitor_t mem_mon;
  lv_mem_monitor(&mem_mon);
  printf("Free memory: %d bytes\n", mem_mon.free_size);

  lv_fs_file_t file;
  if (lv_fs_open(&file, "A:wallpaper.gif", LV_FS_MODE_RD) == LV_FS_RES_OK) {
    lv_fs_close(&file);  // File exists, proceed with loading
    lv_gif_set_src(img, "A:wallpaper.gif");
    Serial.println("GIF Loaded Successfully");
  } else {
    Serial.println("Failed to Load GIF: File not found or inaccessible");
  }

  Serial.print("Available Heap after: ");
  Serial.println(esp_get_free_heap_size());

  lv_mem_monitor(&mem_mon);
  printf("Free memory: %d bytes\n", mem_mon.free_size);

  lv_obj_align(img, LV_ALIGN_CENTER, 0, 0);
}

void display_text() {
  // Create a style for the text
  static lv_style_t style_text;
  lv_style_init(&style_text);

  // Set the text color to white
  lv_style_set_text_color(&style_text, lv_color_white());

  // // Set the shadow color to black (this will simulate the outline)
  // lv_style_set_shadow_color(&style_text, lv_color_black());

  // // Set the shadow width to create the outline effect
  // lv_style_set_shadow_width(&style_text, 2);  // Adjust for desired outline thickness

  // // Set the shadow offset to 0 so it surrounds the text evenly
  // lv_style_set_shadow_ofs_x(&style_text, 0);
  // lv_style_set_shadow_ofs_y(&style_text, 0);

  lv_obj_t* label1 = lv_label_create(lv_scr_act());

  // Apply the style to the label
  lv_obj_add_style(label1, &style_text, LV_PART_MAIN);

  // lv_style_set_text_font(&label1, &LV_FONT_MONTSERRAT_46);  /*Set a larger font*/
  lv_label_set_long_mode(label1, LV_LABEL_LONG_WRAP); /*Break the long lines*/
  lv_label_set_text(label1, "Test text");
  lv_obj_set_width(label1, 150); /*Set smaller width to make the lines wrap*/
  lv_obj_set_style_text_align(label1, LV_TEXT_ALIGN_CENTER, 0);
  lv_obj_align(label1, LV_ALIGN_CENTER, 0, 0);
}

void setup() {
  delay(200);
  Serial.begin(115200);
  scr_lvgl_init();

  lv_init();

  //lv_log_register_print_cb(my_print);  // Register print function for LVGL logs

  // Get the active screen (root object for the display)
  lv_obj_t* screen = lv_scr_act();

  // Set the background color of the entire screen to black
  lv_obj_set_style_bg_color(screen, lv_color_black(), 0);  // 0 is the part ID for the main part
  lv_obj_set_style_bg_opa(screen, LV_OPA_COVER, 0);        // Set opacity to fully opaque

  // Configure the SDMMC host
  SD_MMC.setPins(SD_MMC_CLK_PIN, SD_MMC_CMD_PIN, SD_MMC_D0_PIN, SD_MMC_D1_PIN, SD_MMC_D2_PIN, SD_MMC_D3_PIN);

  if (!SD_MMC.begin()) {
    Serial.println("Card Mount Failed");
    return;
  }

  uint8_t cardType = SD_MMC.cardType();
  if (cardType == CARD_NONE) {
    Serial.println("No SD card attached");
    return;
  }

  Serial.println("SD Card initialized successfully.");

  display_animation();

  //display_text();
}

void loop() {
  lv_timer_handler();
  vTaskDelay(5);

  lv_mem_monitor_t mem_mon;
  lv_mem_monitor(&mem_mon);
  printf("Free memory: %d bytes\n", mem_mon.free_size);

  Serial.print("Available Heap: ");
  Serial.println(esp_get_free_heap_size());
}