Slow mode (Home Assistant switch "FlipDot Display Slow mode", dropdown
"FlipDot Display Slow mode interval", web UI Settings) makes the display
change only every 1, 2, 5, 10, 15, 20, 30 or 60 minutes, on the clock, and
powers it off in between: less noise. Nothing else is drawn meanwhile, also
no page changes. It updates at once after boot, the night, the Power switch
and live mode, and when it is switched off. Rules can override it ("show at
once in slow mode"): while their page is shown the display works normally.
Settings layout 7 and schedule layout 4 (older records are converted; they
are stored again once the firmware is marked good, so a rollback still
finds the old ones). Pages in older formats are rewritten in the current
one, in time-boxed steps. /api/status reports old_data_left.
Version 2.15.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Rules: "also over a page chosen by hand" (on by default); off, a rule
waits until the manual pick ends. Schedule store version 3, version 2
records are read with the option on.
- The Clock page is stored at boot from the built-in one and can be
edited; Reset (deleting it) brings back the original.
- Home Assistant attributes were never found: ArduinoJson 7.4 takes a
char array key as a literal of its full array length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each rule has the blocks it acts in (none: always; without a running
schedule always). Stored as a block mask (schedule format 2, version 1
records are converted), in JSON as the blocks' start times. Version 2.7.1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Schedule: daily blocks from a start time, each with up to 6 rotating pages
or bitmaps (own duration), switching with the effect or instantly. A manual
pick (Show tab, HA Mode) lasts until the next block; Back to schedule ends it.
- Rules: an HA state (=, is not, above, below) shows a page while true, adds it
to the rotation while true, or shows it for N seconds when it becomes true.
Each rule is polled at its own interval, with a 60 s back-off on errors.
- PageSelector (pure logic, tested) decides the shown page; schedule stored in
NVS; HA sensor Shown page and button Back to schedule.
- Web UI: Schedule and Stopwatch tabs, bitmaps used by pages or rules in their
own subsection, schedule in export/import. Version 2.6.0.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mangavalkandClaude Opus 5.5