Simulation - sim/: the unchanged robot firmware compiled into hexapod_sim.dll against PC stand-ins (Arduino, Servo, Wire + register-level MPU6050, RF24 with matching-config radio), a kinematic body model (support plane + planted-foot odometry) that also drives the simulated IMU, and a headless smoke test (sim_smoke). build.ps1 builds and tests. - Hexapod_Simulation_Unity/ folded in (history kept in a bundle outside the repo). Assets/HexapodSim loads the DLL, drives the existing leg rig, and offers joystick / keyboard / robot-serial input plus a test panel. Robot (all found or confirmed in the simulation) - Config.h geometry taken from the Unity model. - IK femur elevation sign, gait stance direction, body pose rotation direction, yaw lever arm. - Stance feet integrated from the current command; gait restarts at mid-stance; heading integrates the applied turn rate, only while walking. - Leg clearance and reach checks (Limits::feetFeasible); walk command and body pose scaled as a whole, pose scale rate-limited, planted feet guarded so the body never snaps or legs collide. - Robot-gyro self-leveling as an integrator. - Heading mode: steering relative to the body; S walks backward. - Standing height from the remote (STANCE_HEIGHT_RANGE_MM). Protocol v3 (reflash both boards) - CmdPacket gains body_height (22 bytes). Remote - Height slider (Nextion hHeight/nHeight, serial [ ]). - Fixed unspecified I2C read order in RemoteIMU. LEGACY/: owner's old Nextion HMI and remote hardware assets. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
30 lines
1.0 KiB
Plaintext
30 lines
1.0 KiB
Plaintext
%YAML 1.1
|
|
%TAG !u! tag:unity3d.com,2011:
|
|
--- !u!55 &1
|
|
PhysicsManager:
|
|
m_ObjectHideFlags: 0
|
|
serializedVersion: 7
|
|
m_Gravity: {x: 0, y: -9.81, z: 0}
|
|
m_DefaultMaterial: {fileID: 0}
|
|
m_BounceThreshold: 2
|
|
m_SleepThreshold: 0.005
|
|
m_DefaultContactOffset: 0.01
|
|
m_DefaultSolverIterations: 6
|
|
m_DefaultSolverVelocityIterations: 1
|
|
m_QueriesHitBackfaces: 0
|
|
m_QueriesHitTriggers: 1
|
|
m_EnableAdaptiveForce: 0
|
|
m_ClothInterCollisionDistance: 0
|
|
m_ClothInterCollisionStiffness: 0
|
|
m_ContactsGeneration: 1
|
|
m_LayerCollisionMatrix: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
|
|
m_AutoSimulation: 1
|
|
m_AutoSyncTransforms: 1
|
|
m_ClothInterCollisionSettingsToggle: 0
|
|
m_ContactPairsMode: 0
|
|
m_BroadphaseType: 0
|
|
m_WorldBounds:
|
|
m_Center: {x: 0, y: 0, z: 0}
|
|
m_Extent: {x: 250, y: 250, z: 250}
|
|
m_WorldSubdivisions: 8
|