mangavalkandClaude Opus 5.5
935526eab5
Simulation - sim/: the unchanged robot firmware compiled into hexapod_sim.dll against PC stand-ins (Arduino, Servo, Wire + register-level MPU6050, RF24 with matching-config radio), a kinematic body model (support plane + planted-foot odometry) that also drives the simulated IMU, and a headless smoke test (sim_smoke). build.ps1 builds and tests. - Hexapod_Simulation_Unity/ folded in (history kept in a bundle outside the repo). Assets/HexapodSim loads the DLL, drives the existing leg rig, and offers joystick / keyboard / robot-serial input plus a test panel. Robot (all found or confirmed in the simulation) - Config.h geometry taken from the Unity model. - IK femur elevation sign, gait stance direction, body pose rotation direction, yaw lever arm. - Stance feet integrated from the current command; gait restarts at mid-stance; heading integrates the applied turn rate, only while walking. - Leg clearance and reach checks (Limits::feetFeasible); walk command and body pose scaled as a whole, pose scale rate-limited, planted feet guarded so the body never snaps or legs collide. - Robot-gyro self-leveling as an integrator. - Heading mode: steering relative to the body; S walks backward. - Standing height from the remote (STANCE_HEIGHT_RANGE_MM). Protocol v3 (reflash both boards) - CmdPacket gains body_height (22 bytes). Remote - Height slider (Nextion hHeight/nHeight, serial [ ]). - Fixed unspecified I2C read order in RemoteIMU. LEGACY/: owner's old Nextion HMI and remote hardware assets. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
10 lines
191 B
Plaintext
10 lines
191 B
Plaintext
fileFormatVersion: 2
|
|
guid: e105e00cdce8456482d26b1fcd1ca47d
|
|
folderAsset: yes
|
|
timeCreated: 1448926516
|
|
licenseType: Pro
|
|
DefaultImporter:
|
|
userData:
|
|
assetBundleName:
|
|
assetBundleVariant:
|