mangavalkandClaude Opus 5.5
a961fa721b
- LEGACY/remote/teensy/: old remote sketch from https://mangavalk.com/Hexapod/remote.git @ 492dece (reference only). - remote/Config.h: sticks on A0-A5, Nextion on Serial1 (0/1), as in the old sketch; MPU6050 moved to Wire2 (25/24) since A4/A5 are Wire's pins. - NextionUI: controls on a vscope-global "control" page added to the old HMI; keeps the old t1 status texts; the old page-1 b2 button (and serial 'U') enter Nextion upload passthrough, following the PC's baud. - Docs: NEXTION.md, remote README wiring, CLAUDE.md. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
51 lines
1.8 KiB
C
51 lines
1.8 KiB
C
#pragma once
|
|
#include <Arduino.h>
|
|
|
|
// Operator commands. Produced by the Nextion touchscreen (NextionUI) and by
|
|
// the USB serial console (SerialConsole) through the same path, so the
|
|
// remote can be fully exercised on the bench without the display attached.
|
|
enum class UiCmd : uint8_t {
|
|
None = 0,
|
|
ToggleArm,
|
|
Disarm, // unconditional - the big red button
|
|
ToggleStand,
|
|
ToggleGait, // tripod <-> wave
|
|
ToggleWalkMode, // direct (A) <-> heading-hold (B)
|
|
ToggleRStickXlate, // right stick: rotation <-> translation
|
|
ToggleRemoteGyro,
|
|
ToggleRobotGyro,
|
|
SetSpeed, // value = 0..255
|
|
SpeedUp, // serial console only
|
|
SpeedDown, // serial console only
|
|
SetHeight, // value = 0..200, 100 = default standing height
|
|
HeightUp, // serial console only
|
|
HeightDown, // serial console only
|
|
ZeroGyro, // capture the handset's current attitude as "level"
|
|
CalStartSave, // start sweep calibration, or save it if running
|
|
CalCancel,
|
|
NextionUpload, // USB <-> display passthrough for Nextion Editor (handled in remote.ino)
|
|
};
|
|
|
|
struct UiEvent {
|
|
UiCmd cmd = UiCmd::None;
|
|
uint8_t value = 0;
|
|
};
|
|
|
|
// Everything the display shows. The remote is authoritative: the Nextion
|
|
// only sends requests, and always renders what's in here.
|
|
struct UiView {
|
|
bool armed = false;
|
|
bool stand = false;
|
|
bool gait_wave = false;
|
|
bool mode_b = false;
|
|
bool rstick_xlate = false;
|
|
bool remote_gyro = false;
|
|
bool robot_gyro = false;
|
|
bool calibrating = false;
|
|
uint8_t speed_target = 0;
|
|
int16_t height = 0; // -1000..1000, 0 = default
|
|
bool link_ok = false;
|
|
uint8_t link_pct = 0;
|
|
const char* message = ""; // always a string literal - NextionUI diffs it by pointer
|
|
};
|