hexapod-robot/2026-current/CLAUDE.md

Hexapod: project memory

Hexapod walking robot plus a custom handheld remote, both Teensy-based and linked one-way over nRF24L01 (remote → robot, with hardware auto-ack only). A Unity simulation runs the unchanged robot firmware as a DLL. This file is the persistent context for working on any part of it. Read it fully before changing anything.

Layout and toolchain

robot/                      Teensy 3.6 firmware (PlatformIO env robot)
remote/                     Teensy 4.1 firmware (PlatformIO env remote)
shared/HexapodProtocol/     wire protocol, used by robot, remote and sim
sim/                        robot firmware -> hexapod_sim.dll (CMake + g++), headless smoke test
Hexapod_Simulation_Unity/   Unity 6000.6 project that loads the DLL (Assets/HexapodSim/)
LEGACY/                     owner's older material for reference (remote/remote.HMI = old Nextion UI, 6 pages;
                            remote/teensy/ = old remote sketch from https://mangavalk.com/Hexapod/remote.git @ 492dece;
                            Hexapod_Teensy/ = old robot sketch: servo passthrough only, no IK - see "Old robot sketch" below;
                            Hexapod_NEW/, HexapodRobot/ = older generations with their own IK, driving an external
                            SSC-32-style servo controller - all three from https://mangavalk.com/Hexapod/Hexapod @ 7945005)
scripts/                    PlatformIO helper

PlatformIO, one platformio.ini, two environments:

Env	Board	Sketch dir	Purpose
robot	teensy36	robot/	walking robot
remote	teensy41	remote/	handheld transmitter

• shared/ is PlatformIO's lib_dir. shared/HexapodProtocol/ is a header-only library both sketches #include <HexapodProtocol.h>.
• PlatformIO has a single global src_dir and only converts .ino files at its root, so scripts/select_src_dir.py (a pre: extra script) swaps PROJECT_SRC_DIR to each env's custom_src_dir. That keeps robot/ and remote/ plain Arduino sketch folders: one .ino plus paired .h/.cpp per concern. Keep that structure. No giant files, no src/ folders.
• RF24 (nrf24/RF24, resolved 1.6.x) comes from lib_deps. Servo, Wire, SPI and EEPROM ship with the Teensy framework.
• Build: pio run (both), pio run -e robot, pio run -e remote. On this machine pio lives at C:\Users\patri\.platformio\penv\Scripts\pio.exe. Both envs build clean. Build both after touching shared/.

Communication contract (shared/HexapodProtocol/HexapodProtocol.h)

CmdPacket, 22 bytes (static_asserted; protocol v3), sent remote → robot at 100 Hz (robot CONTROL_HZ is 60):

Field	Range	Meaning
vx	±1000	+ forward
vy	±1000	+ strafe left
yaw_rate	±1000	+ turn left (CCW). Ignored by the robot in mode B
rx, ry, rz	±1000	right stick: roll/pitch/yaw, or X/Y/Z offset when FLAG_RSTICK_XLATE
remote_roll, remote_pitch	±1000	handset tilt feedforward, used only when FLAG_REMOTE_GYRO
body_height	±1000	standing height setting: STANCE_HEIGHT_MM ± STANCE_HEIGHT_RANGE_MM (150 ± 50), 0 = default; the robot rate-limits it (STANCE_HEIGHT_RATE_MM_S) and everything built on Kinematics::neutralStance() follows
speed_scale	0–255	multiplies vx/vy on the robot
flags	bits	ARMED, STAND, WALK, MODE_B, RSTICK_XLATE, GAIT_WAVE, REMOTE_GYRO, ROBOT_GYRO (bits 0–7)
seq	0–255	increments per packet (robot doesn't check it yet)

• Axis convention (ROS REP-103 style): body +X forward, +Y left, +Z up. +roll = right side down, +pitch = nose down, +yaw = CCW.
• Normalized fields. The remote never knows robot geometry. The robot's InputMapper owns the scaling: MAX_LINEAR_MM_S 150, MAX_TURN_RATE_DEG_S 90, MAX_TILT_DEG 20, MAX_POSE_OFFSET_MM 40.
• Radio settings live in the same header: address "HXPD1", channel 96, 250 kbps, PA LOW, static payload size = sizeof(CmdPacket) on both radios. That makes version mismatches fail closed: packets are not received, the robot times out, and it disarms.
• Changing the protocol means reflashing both boards. Keep it ≤ 32 bytes and update the static_assert.
• Failsafes: the robot sets linkOk() false after LINK_TIMEOUT_SEC (0.3 s) without packets and then uses a default CmdPacket (flags 0 = disarmed, servos detached). The remote disarms itself after LINK_LOST_MS (300 ms) without acks, so the robot can't re-arm itself when the link returns.
• Division of labor: the remote only fills fields per this contract. Mode A/B interpretation, heading-hold, pose scaling and all smoothing of pose happen on the robot. Don't duplicate InputMapper logic in the remote.

Robot architecture (robot/, Teensy 3.6)

Loop at CONTROL_HZ (60): comms → InputMapper → IMU → heading integrate → StateMachine → gait/sit-stand targets → BodyPose → Limits clamp → IK → joint-rate clamp → servos.

Module	Role
robot.ino	setup/loop wiring, open-loop heading estimate, sit/stand blend, TEST_SERIAL_INPUT harness
Config.h	all placeholder geometry/pins/rates
SmoothedValue.h	rate-limited setpoint smoother used for every discrete command
Kinematics	per-leg 3-DOF analytic IK, neutralStance()
GaitEngine	tripod/wave patterns, per-leg phase, pattern swap only at touchdown. limitTwist() (called in robot.ino right after InputMapper, so the heading estimate integrates the achieved ω) scales the walk command until its stride envelope (strideEnvelope(): even/odd legs at opposite stride ends, plus a lifted set) is feasible, so full-rate turning can't make neighbouring legs collide. Stance feet are integrated each tick from the current twist (v + ω×r at the foot); swing feet arc from lift-off to the next leading edge. resetFeet() on entering WALKING restarts the cycle with grounded legs at mid-stance
BodyPose	6-axis body pose (smoothed command + IMU roll/pitch correction), applied to foot targets as the inverse rotation, so the body moves as commanded. fitToReach() scales the whole pose by one factor (binary search on Limits::feetFeasible; drops at once, recovers at 1/s) so combined poses never bend individual legs out of a rigid foot pattern or into each other. While walking it fits against the stride envelope, not the current feet, so it doesn't saw with the step cycle
RobotIMU	MPU6050 complementary filter (α 0.98), gated by FLAG_ROBOT_GYRO
StateMachine	DISARMED → SIT → STAND → WALKING, sit/stand blend at 1/s. Disarm is instant
InputMapper	CmdPacket → Twist + PoseCommand + mode flags + stance height. Mode B = steering relative to where the body faces right now: the forward/back stick component sets walking direction (vx sign), the sideways component steers (target = current heading + atan2(vy,
Limits	workspace clamp (70 mm horiz / 60 mm vert), joint rate clamp, ≥3-legs-in-stance check (not acted on yet). feetFeasible() = every foot in its workspace with valid IK and neighbouring legs' segments (coxa/femur/tibia, via Kinematics::jointPositions) ≥ LEG_CLEARANCE_MM apart. This is the single "physically possible" test used by gait and pose limiting
Comms	nRF24 RX, link timeout, injectPacket() for the harness
ServoDriver	18 servos on hardware PWM (50 Hz, 16-bit), per-servo calibration from Config.h SERVOS, duty 0 = relaxed, skips invalid IK solutions

Remote architecture (remote/, Teensy 4.1)

Loop: drain Nextion + USB serial input every pass. On each TX_HZ (100) tick: sticks → IMU → radio link status → RemoteState (smoothers, link-loss disarm) → PacketBuilder → radio.write → Nextion render.

Module	Role
remote.ino	loop wiring, status print, packet dump
Config.h	all placeholder pins, calibration defaults, deadzones, rates
UiTypes.h	UiCmd/UiEvent (operator requests), UiView (what the display shows)
Sticks	6 analog axes: ADC averaging + IIR, piecewise calibration around center, invert, deadzone with rescale, expo → ±1000. Boot-time center capture, sweep calibration saved to EEPROM (magic/version/checksum)
RemoteIMU	MPU6050, same complementary filter as the robot, axis remap for mounting, boot gyro-bias capture, "level" zero
RemoteState	authoritative operator state and interlocks: arm needs centered sticks, disarm clears stand, stand needs armed, calibrate needs disarmed, link-loss auto-disarm. Smooths speed scale and fades remote tilt in/out
PacketBuilder	the inverse of InputMapper: stick frame → body frame per the contract, per-submode right-stick mapping, FLAG_WALK with 250 ms linger (twist ignored in mode B), tilt deadzone/scale × fade, zeros motion when disarmed
RadioLink	nRF24 TX, short retries (1, 3), ack-based link status and 32-packet quality %
NextionUI	library-free Nextion driver on Serial1. HMI sends '#' len cmd [val] frames via printh. Remote pushes state by component name, as control.<name> (the owner adds a control page with vscope-global components to the old HMI), with diffing, a 2 s full refresh, and a redraw on the Nextion 0x88 "ready" frame. Also writes the old HMI's t1 status texts (NEXTION_STATUS_TEXTS). The old page-1 b2 sends a standard 0x65 touch frame, which triggers runUploadPassthrough(): USB ↔ display bridge for Nextion Editor, following Serial.baud(), never returns. Serial key U does the same
SerialConsole	USB keystrokes that mirror every UI command plus diagnostics
SmoothedValue.h	copy of the robot's (kept separate so robot/ stays untouched)
NEXTION.md	HMI build guide: component names, txt_maxl, touch event code

Remote stick-frame convention: logical X + = right, Y + = forward, twist + = CCW. The mapping into the packet is in PacketBuilder.cpp (e.g. vy = -L_X, translate mode ry = -R_X).

Simulation (sim/ + Hexapod_Simulation_Unity/), details in sim/README.md

• Principle: the robot firmware is compiled unmodified for the PC. No #ifdef SIM in robot/, ever. Hardware is replaced beneath it by sim/shim/ stand-ins (Arduino.h, Servo.h, Wire.h with a register-level MPU6050, RF24.h with a matching-config radio, SPI.h, EEPROM.h).
• Build: .\sim\build.ps1 (configure + build + smoke test; uses g++/cmake/ninja from C:\Strawberry\c\bin if they're not on PATH). Rebuild after any robot/ or shared/ change.
• The dev PC is Windows, and the owner uses Windows PowerShell 5.1. Every documented command must work there: no &&, one command per line, or a .ps1 script.
• Gotchas (already solved; don't undo them):
  • robot/ must never be on any include path, not even -iquote. On Windows' case-insensitive filesystem GCC's <limits.h> chain would pick up robot/Limits.h. So each robot/*.cpp is compiled through a generated wrapper in sim/build/robot_src/, and sim sources include "../robot/..." directly.
  • The shim's min/max return std::common_type by value; a decltype return type gave dangling references.
• robot_ino.cpp compiles robot.ino and exposes read-only views of its globals (SimRobotAccess.h). The API is in HexapodSimApi.h (HXSIM_API_VERSION, mirrored by HexapodSimNative.ExpectedApiVersion in C#). The FK in HexapodSimApi.cpp is deliberately independent of robot/Kinematics.cpp.
• Joint convention the sim (and Config.h limits) assume: coxa + = CCW from the mount angle; femur = elevation, + = up; tibia relative to the femur, + = up (knee-down stance is about −98°). Rig mapping: hip1.y = −(coxa + mount offset), Hip2.x = −femur, Knie.x = −(tibia + 90).
• Unity (Assets/HexapodSim/):
  • HexapodSimBootstrap auto-adds HexapodSimulation in any scene and disables the old scripts (Walk, RotationControl, Leg, HandleHoystick). Those are kept for reference only.
  • HexapodSimNative loads a temp copy of the DLL via LoadLibrary/GetProcAddress, so there's no file lock and each Play is a fresh power-on.
  • SimRemote stands in for the remote (Joystick axes "1"–"6" as in the old project, Keyboard, or the robot's own serial harness) and mirrors remote/PacketBuilder.cpp + RemoteState.cpp rules. Keep them in sync.
  • SimTestPanel is the IMGUI panel (F1).
  • Body motion is kinematic and lives in the DLL (sim/SimBody.cpp, hxsim_get_body), so Unity shows exactly what sim_smoke checks. The ground is the support plane (a plane all feet are on or above; prefer most contacts, then continuity with the last ground), and 2D Kabsch on the feet that stayed grounded gives planar motion. The simulated MPU6050 is fed from it after every control tick. Ground tilt comes from hxsim_set_ground_tilt. The old C# "lowest feet + plane fit" model flipped the body as soon as it rolled (only one side counted as grounded); don't reintroduce it.
  • Robot forward = Unity −X, 1 Unity unit = 10 mm.
• The Unity project was folded in from its own repo. Its history is in D:\Claude\Hexapod_Simulation_Unity-history.bundle. Its nested .git must be removed by the owner (deleting it was blocked for Claude).

Testing without the other board

• Robot without remote: #define TEST_SERIAL_INPUT in robot.ino (on by default). Serial 115200, single keys: a arm, s sit/stand, w/x vx ±200, q/e vy ±200 (left/right), z/c yaw_rate ±200 (left/right), g gait, m mode, space = zero velocity. Keys inject through Comms::injectPacket(), the same path radio packets take. Order: arm → stand → walk. The harness does not exercise the right stick or remote tilt. Add keys if needed.
• Robot firmware in simulation: sim/build/sim_smoke.exe (headless, scripted checks), or Unity Play mode with Keyboard / Joystick / Robot serial input.
• Remote without robot or display: the USB serial console (see remote/README.md). p shows raw/mapped sticks, IMU, link and state. d dumps packets at 10 Hz. With no robot, the link shows DOWN and arming still works; the link-loss disarm only fires after the link was up once.

Placeholders and bench-check items (not yet verified on hardware)

Robot (robot/README.md has detail):

• Config.h geometry now comes from the Unity model (owner's request), 1 unit = 10 mm:

  • legs at X ±100 / 0, Y ±50 / ±65 mm,
  • mount angles ±90° (coxa straight sideways at servo center),
  • coxa/femur/tibia 55/100/150 mm,
  • stance radius 75 (so 130 mm out from the coxa pivot), height 150 mm.

  The old scene's Leg.translateX = ±5 was only the old code's rotation pivot; the rig hips are at x ±10. Still to confirm on the real chassis: joint limits, servo pins, µs/deg calibration, MAX_JOINT_DEG_S (in robot.ino), the Limits envelope, InputMapper maxima.

• Fixed (owner-approved): the Kinematics.cpp femur elevation sign (atan2(local_z, horiz); it used to solve for a foot above the hip, so every solution was invalid). Stance pose is now femur −1.2°, tibia −98.3°, feet exactly at −150 mm. sim_smoke guards this.

• Servos (owner-approved):

  • The robot board is a Teensy 3.6 (owner confirmed), and platformio.ini targets teensy36.
  • Config.h SERVOS[6][3] is a per-servo table: pin, us_at_0deg, signed us_per_deg (the sign is the direction), and us_min/us_max. It's built by oldServo() from the old sketch's numbers (range, trim, zero, direction, offset) so they stay readable.
  • ServoDriver drives all 18 servos with hardware PWM: 50 Hz, 16-bit analogWrite, and duty 0 = relaxed. The Teensy 3.6 Servo library stops at 12 servos, which is why the old sketch used PWMServo.
  • Radio: CE 39 / CSN 15, with SPI SCK moved to pin 14 (SPI.setSCK(RADIO_SCK_PIN) in Comms::begin).
  • The sim's shims implement analogWrite/analogWriteFrequency/ analogWriteResolution, and decode pulses through the same table (API version 6).
  • The old ±90° offsets on the rear-left/front-left coxas left those servos at the end of their travel, and the sim showed those legs clamping (8 failing checks). The owner chose to re-horn both by 90°, so the offsets are 0. Must be done on the robot before running this firmware.
  • BENCH: every direction, plus the femur's ≈6.7 µs/° (vs ≈10.4 for coxa/tibia).

• IK knee direction (tibia_rad sign), BodyPose roll/pitch sign, IMU register map, and the sit pose assuming feet stay grounded.

• Fixed after the owner saw them in Unity (sim_smoke now guards each):

  • Right-stick rotations were inverted: BodyPose::apply rotated the feet by the pose instead of by its inverse. This also made the robot-gyro correction positive feedback.
  • Heading mode was off. The body turned at only 41% of the commanded ω (the gait used the hip as the yaw lever arm instead of the foot). The heading estimate also integrated while standing. Stance feet were interpolated between endpoints recomputed each tick, so a changing command undid part of the motion. And walking started with the feet at neutral but at arbitrary phases, so grounded legs overran the workspace clamp.
  • Now: mode A turns at about 95% of command, and mode B turns 83° of a commanded 90°. The rest is open-loop estimate error; fusing IMU yaw is the next step.
  • Combined right-stick poses (e.g. full roll+pitch+yaw) used to clamp each foot on its own, distorting the planted feet by up to 29 mm. Now the whole pose is reach-scaled (BodyPose::fitToReach). sim_smoke checks that four full-deflection combos keep the feet rigid within 3 mm with no frozen servos. The Unity panel shows the scale ("body pose 63% (leg reach limit)"), via HxStatus.pose_reach_scale (API version 2).
  • Legs could collide (full-rate turning needs ~60 mm half-strides, and neighbouring feet are ~100 mm apart), and walking while posing made the pose scale saw with the step cycle. Both are now handled by leg clearance in Limits::feetFeasible plus GaitEngine::limitTwist and envelope-based fitToReach. sim_smoke checks clearance with its own FK, and checks rigidity and steadiness while walking and posing. The panel shows "walk NN%" (HxStatus.twist_scale, API version 3).
  • Walking + rotate keys still freaked out. Changing the command mid-step ran planted feet out of reach, and the pose scale snapped down, which the per-joint rate clamp then tore out of formation. Now:
    • GaitEngine::update moves all planted feet by one common factor that keeps them feasible (with the pose applied), and the heading integrates appliedTwist().
    • The pose scale moves at a bounded rate both ways (REACH_DROP_PER_SEC 3/s, recover 1/s).
    • While walking, the pose fits the requested stride and the current feet (walking has priority), and the walk is limited again against the current pose (limitTwist(..., pose, chained)), so it slows during the handover.
    • sim_smoke's "toggling rotate keys" check mimics a keyboard.
  • Robot-gyro self-leveling was correction = -measured tilt, which only halves a slope because the measurement includes the correction. It's now an integrator (ROBOT_GYRO_KI 3/s, clamped to ROBOT_GYRO_MAX_CORR_DEG) on (measured tilt − operator's commanded tilt). sim_smoke: an 8° ground is levelled to < 1° without oscillation.

• Fixed (owner-approved): the GaitEngine::update stance direction. Stance now runs from neutral + half to neutral - half, so the feet push opposite to the commanded motion. The harness z/c keys were corrected to z = yaw_rate + (turn left). sim_smoke checks that +vx goes forward and +yaw_rate turns left.

• Old robot sketch (LEGACY/Hexapod_Teensy/): real hardware facts. It received 18 servo angles (0–180) over RF24Network (channel 90) from the old remote/Unity and wrote them with PWMServo. No IK, no gait.

  • Board: Teensy 3.6 (pins 36–39 and SPI.setSCK(14), confirmed by the owner).
  • Radio: CE 39, CSN 15, SPI SCK 14 / MOSI 11 / MISO 12. Now in robot/Config.h.
  • Servo pins (servo index 0–17 = 6 × coxa, femur, tibia): 4,3,2, 7,6,5, 10,9,8, 23,22,21, 20,36,37, 17,16,38. No 11/12 conflict with SPI.
  • Index → leg (from the old Unity Leg.startServo):
    • 0 = rear-right, 3 = mid-right, 6 = front-right (firmware legs 2, 1, 0);
    • 9 = rear-left, 12 = mid-left, 15 = front-left (legs 3, 4, 5).
  • Pulse ranges (PWMServo maps 0–180° linearly onto min..max):
    • coxa and tibia 553–2425 µs (≈10.4 µs/°);
    • femur 840–2050 µs (≈6.7 µs/°);
    • plus a per-servo µs trim servoCallibration[] (0,100,0, 0,100,-30, 0,80,-50, -120,0,0, -10,20,0, 0,20,-80).
  • Angle offsets: servoOffset[] is +90° on index 9 (RL coxa) and −90° on index 15 (FL coxa), so those two horns are mounted rotated. The owner will re-horn them; the new firmware uses offset 0.
  • Direction mapping (derived from the old Unity Leg.cs, in this repo's joint convention):
    • coxa servo = 90 − coxa;
    • femur servo = 90 + femur (right), 90 − femur (left);
    • tibia servo = −tibia (right), 180 + tibia (left), so 90 = knee bent 90°.
  • All of this is now in Config.h SERVOS (see "Servos" above).

• Older sketches (LEGACY/Hexapod_NEW/, LEGACY/HexapodRobot/, 2014–2016 era): an earlier electronics generation. They did IK on the board and sent #n Pxxxx … T0 text commands over Serial1 to an external SSC-32-style servo controller (channels 0–9 and 16–24).

  • Femur range: it was already narrower there (600–2400 µs coxa/tibia, 960–2100 µs femur over 0–180°), which corroborates the ≈6.7 µs/° femur in SERVOS.
  • Links: femur 10, tibia 15 (cm), with no coxa length in that IK.
  • Hip layout comment in Hexapod_NEW/HexapodClass.h: width 9.5 cm (front/rear) and 14 cm (middle), 10 cm front-to-middle-to-rear. The Unity model has 10 / 13 / 10. Whichever chassis is current, measure before trusting LEG_MOUNT_*.
  • Nothing else from them applies to the current Teensy 3.6 hardware.

• RobotIMU.cpp reads (Wire.read() << 8) | Wire.read(), and C++ leaves the order of those two calls unspecified (fixed in the remote's copy).

• Heading for mode B is open-loop (integrated commanded ω). Fusing IMU yaw is a planned upgrade.

• Limits::stancePolygonOk() is computed but not acted on.

Remote (remote/README.md has detail):

• Pins in remote/Config.h, taken from the old remote sketch: radio CE 9 / CSN 10, sticks A0–A5, Nextion on Serial1 (0/1). The MPU6050 is on Wire2 (25/24), since A4/A5 = Wire's SDA/SCL are stick pins; that's the owner's choice and needs rewiring the MPU. Which stick axis is on which pin is still unknown.
• STICK_INVERT[], calibration defaults, deadzones, expo.
• IMU_AXIS_FROM_CHIP / IMU_AXIS_SIGN depend on how the MPU6050 is mounted in the handset.
• The Nextion must have bauds=115200 in Program.s, and the HMI must match NEXTION.md. The owner's old 6-page HMI is in LEGACY/remote/remote.HMI; its component names aren't readable outside Nextion Editor. The compiled .tft is gitignored.
• What the old remote sketch (LEGACY/remote/teensy/, last ran on a Teensy) tells us about the real hardware:

  • Nextion on Serial1 (pins 0/1), driven by the ITEAD Nextion library, whose nexInit() runs at 9600. remote/Config.h now uses Serial1 and expects 115200 via bauds= in the HMI.

  • The old HMI is a servo monitor, not the control UI in NEXTION.md:

    • page 1: t1 "connected"/"not connected", and b2 = enter upload mode;
    • page 3: sliders h0–h17 showing the 18 servo positions, plus t1 status;
    • page 4: uploadscreen.

    None of the arm/stand/gait/mode/gyro/speed/height controls exist yet. The owner chose to add a control page per NEXTION.md.

  • b2 → Nextion upload passthrough: shows uploadscreen, then bridges USB ↔ Serial1 forever, so Nextion Editor can upload a .tft through the remote's USB port. The new firmware keeps this.

  • Sticks on A0–A5, contiguous (analogInPin + i). On the Teensy 4.1, A4/A5 are pins 18/19 = Wire SDA/SCL, which the MPU6050 needs. The old code had the MPU code disabled (if (false)). Owner's decision: keep the sticks, move the MPU to Wire2.

  • nRF24 on CE 9 / CSN 10, the same as remote/Config.h. It used RF24Network on channel 90, which the new protocol doesn't.

  • Stick calibration was a 10 s min/max sweep saved to EEPROM, output 0–255, with no center or deadzone.

  • USB serial at 250000. It received 18 servo bytes + checksum + 0xFE from the old Unity Serial.cs (servo passthrough, forwarded over RF to the robot) and printed i_value,... stick lines.

• The Unity remote stand-in's joystick axis assignment (which of axes 4/6 is forward) couldn't be recovered from the old code. Check it with the panel's raw-axis readout.
• Radio retry timing (RADIO_RETRY_*) is untested under real link loss.

Working rules for this repo

• The robot side is owner-verified code. Don't edit robot/ unless something is factually wrong relative to the protocol, and ask the owner first even then. Flag suspected robot bugs instead of fixing them. To try a robot fix, copy robot/ shared/ sim/ to a scratch dir, patch the copy and run sim_smoke there.
• LEGACY/ is reference material from the owner. Don't modify it.
• Protocol changes go in shared/HexapodProtocol/ only. Update the size static_assert, this file's contract table, and both READMEs.
• Match the existing style: config constants at the top of Config.h with BENCH comments for anything hardware-dependent, SmoothedValue rate limiting on any setpoint that can jump, and paired .h/.cpp per concern.
• Planned or possible next steps: an ack-payload telemetry channel from robot → remote (state, battery, link) to show real robot state on the Nextion, battery monitoring on both sides, a .HMI file checked into remote/.