Firmware simulation, Unity project, and sim-verified robot fixes

Simulation
- sim/: the unchanged robot firmware compiled into hexapod_sim.dll
  against PC stand-ins (Arduino, Servo, Wire + register-level MPU6050,
  RF24 with matching-config radio), a kinematic body model (support
  plane + planted-foot odometry) that also drives the simulated IMU,
  and a headless smoke test (sim_smoke). build.ps1 builds and tests.
- Hexapod_Simulation_Unity/ folded in (history kept in a bundle
  outside the repo). Assets/HexapodSim loads the DLL, drives the
  existing leg rig, and offers joystick / keyboard / robot-serial
  input plus a test panel.

Robot (all found or confirmed in the simulation)
- Config.h geometry taken from the Unity model.
- IK femur elevation sign, gait stance direction, body pose
  rotation direction, yaw lever arm.
- Stance feet integrated from the current command; gait restarts at
  mid-stance; heading integrates the applied turn rate, only while
  walking.
- Leg clearance and reach checks (Limits::feetFeasible); walk command
  and body pose scaled as a whole, pose scale rate-limited, planted
  feet guarded so the body never snaps or legs collide.
- Robot-gyro self-leveling as an integrator.
- Heading mode: steering relative to the body; S walks backward.
- Standing height from the remote (STANCE_HEIGHT_RANGE_MM).

Protocol v3 (reflash both boards)
- CmdPacket gains body_height (22 bytes).

Remote
- Height slider (Nextion hHeight/nHeight, serial [ ]).
- Fixed unspecified I2C read order in RemoteIMU.

LEGACY/: owner's old Nextion HMI and remote hardware assets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

2026-current/robot/InputMapper.h

@@ -13,6 +13,7 @@ struct MapperOutput {
   bool gait_wave = false;
   bool remote_gyro_enabled = false;
   bool robot_gyro_enabled = false;
+  float stance_height_mm = STANCE_HEIGHT_MM;   // requested standing height (feet below hips)
 };
 
 class InputMapper {
@@ -22,6 +23,7 @@ public:
 
 private:
   float heading_target_deg_ = 0;
+  bool stick_active_ = false;          // mode B: stick currently pushed
   static constexpr float MAX_TURN_RATE_DEG_S = 90.0f;
   static constexpr float HEADING_KP = 2.0f;
   static constexpr float MAX_LINEAR_MM_S = 150.0f;   // tune to your leg workspace / servo speed